lexaiden@lexserv01 ~: sudo badblocks -vsw -t 0xAA -t 0x55 -b 4096 -c 2048 /dev/sde [sudo] Passwort für lexaiden: Es wird nach defekten Blöcken gesucht (Lesen+Schreiben-Modus) Von Block 0 bis 976754645 Es wird getestet Mit Muster 0xaa: erledigt ) Lesen und Vergleichen:erledigt ) Es wird getestet Mit Muster 0x55: erledigt ) Lesen und Vergleichen:erledigt ) Durchgang beendet, 0 defekte Blöcke gefunden. (0/0/0 Fehler) lexaiden@lexserv01 ~: sudo smartctl -AiH --log=error /dev/sde [sudo] Passwort für lexaiden: smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.14-1-MANJARO] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K4000 Device Model: Hitachi HDS5C4040ALE630 Serial Number: PL2311LAG1G9XC LU WWN Device Id: 5 000cca 22ec0aa20 Firmware Version: MPAOA3B0 User Capacity: 4.000.787.030.016 bytes [4,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 3 02:42:10 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 100 3 Spin_Up_Time 0x0007 139 139 024 Pre-fail Always - 510 (Average 494) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 201 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 113 113 020 Pre-fail Offline - 42 9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 42071 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 61 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 317 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 317 194 Temperature_Celsius 0x0002 181 181 000 Old_age Always - 33 (Min/Max 18/44) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 703 SMART Error Log Version: 1 ATA Error Count: 703 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 703 occurred at disk power-on lifetime: 42022 hours (1750 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 80 d0 1d c4 08 Error: ICRC, ABRT 128 sectors at LBA = 0x08c41dd0 = 147070416 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 90 c0 1b c4 e0 08 06:21:48.660 WRITE DMA EXT 35 00 d0 78 11 c4 e0 08 06:21:48.651 WRITE DMA EXT 35 00 88 80 13 c4 e0 08 06:21:48.630 WRITE DMA EXT ef 10 02 00 00 00 a0 08 06:21:48.630 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 08 06:21:48.629 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 702 occurred at disk power-on lifetime: 42022 hours (1750 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 48 c0 13 c4 08 Error: ICRC, ABRT 72 sectors at LBA = 0x08c413c0 = 147067840 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 88 80 13 c4 e0 08 06:21:17.403 WRITE DMA EXT 35 00 78 b0 16 c4 e0 08 06:21:17.391 WRITE DMA EXT 35 00 60 28 18 c4 e0 08 06:21:17.381 WRITE DMA EXT 35 00 a8 08 15 c4 e0 08 06:21:17.375 WRITE DMA EXT 35 00 38 48 13 c4 e0 08 06:21:17.368 WRITE DMA EXT Error 701 occurred at disk power-on lifetime: 42022 hours (1750 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 08 80 0f Error: ICRC, ABRT 1 sectors at LBA = 0x0f800807 = 260048903 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 08 00 08 80 e0 08 06:21:16.446 WRITE DMA EXT 35 00 08 00 08 40 e0 08 06:21:16.438 WRITE DMA EXT 35 00 08 00 08 00 e0 08 06:21:16.434 WRITE DMA EXT 35 00 08 00 08 c0 e0 08 06:21:16.429 WRITE DMA EXT 35 00 08 00 08 80 e0 08 06:21:16.418 WRITE DMA EXT Error 700 occurred at disk power-on lifetime: 42022 hours (1750 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 08 c0 0f Error: ICRC, ABRT 1 sectors at LBA = 0x0fc00807 = 264243207 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 08 00 08 c0 e0 08 06:21:14.362 WRITE DMA EXT 35 00 08 00 08 80 e0 08 06:21:14.351 WRITE DMA EXT 35 00 08 00 08 40 e0 08 06:21:14.348 WRITE DMA EXT 35 00 08 00 08 00 e0 08 06:21:14.338 WRITE DMA EXT 35 00 08 00 08 c0 e0 08 06:21:14.333 WRITE DMA EXT Error 699 occurred at disk power-on lifetime: 42022 hours (1750 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 08 00 0c Error: ICRC, ABRT 1 sectors at LBA = 0x0c000807 = 201328647 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 08 00 08 00 e0 08 06:21:08.868 WRITE DMA EXT 35 00 08 00 08 c0 e0 08 06:21:08.865 WRITE DMA EXT 35 00 08 00 08 80 e0 08 06:21:08.860 WRITE DMA EXT 35 00 08 00 08 40 e0 08 06:21:08.852 WRITE DMA EXT 35 00 08 00 08 00 e0 08 06:21:08.849 WRITE DMA EXT